Suzhou Electric Appliance Research Institute
期刊號： CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

智能化構架下的電機操動機構驅動電機設計

來源：電工電氣發布時間：2021-02-23 09:23 瀏覽次數：873

智能化構架下的電機操動機構驅動電機設計

劉洋1，鐘建英1,2，徐建源1，韓東鵬1，張世維1，朱繼斌1,2
(1 沈陽工業大學 電氣工程學院，遼寧 沈陽 110870；2 平高集團有限公司，河南 平頂山 467001)
 
    摘 要：以高壓開關智能化構架為背景，基于126 kV真空斷路器反力特性和操作速度要求確定驅動電機的設計目標，針對斷路器驅動電機特殊的工況對智能化電器驅動電機的結構設計和電磁設計方案進行論述。建立驅動電機的有限元仿真模型并搭建126 kV真空斷路器電機操動機構驅動電機的試驗平臺，結果表明電機可以滿足設計要求和斷路器分合閘的性能要求，電機輸出與負載特性匹配度高，具有體積小、電感小、響應速度快的優點，易于實現智能控制。
關鍵詞：真空斷路器；電機操動機構；永磁無刷直流電機；有限元仿真
    中圖分類號：TM351；TM561.2     文獻標識碼：A     文章編號：1007-3175(2021)02-0008-04
 
Design of Driving Motor of Motor Operating Mechanism Under
Intelligent Framework
 
LIU Yang1, ZHONG Jian-ying1,2, XU Jian-yuan1, HAN Dong-peng1, ZHANG Shi-wei1, ZHU Ji-bin1,2
（1 College of Electrical Engineering, Shenyang University of Technology, Shenyang 110870, China;
2 Pinggao Group Co., Ltd, Pingdingshan 467001, China）
 
    Abstract: Using the intelligent architecture of high-voltage switch as the background, the design goal of the drive motor is determined based on the reaction force characteristics of the 126 kV vacuum circuit breaker and the operating speed requirements, and according to the special working conditions of the circuit breaker drive motor, the structure design and electromagnetic design scheme of the intelligent electrical appliance drive motor are discussed. It establishes a finite element simulation model of the drive motor and build an experimental platform for the drive motor of the 126 kV vacuum circuit breaker motor operating mechanism, the results show that the motor can meet the design requirements and the performance requirements of circuit breaker opening and closing. The motor output has a high matching degree with the load characteristics, has the advantages of small size, small inductance, and fast response speed, and is easy to intelligent control.
    Key words: vacuum circuit breaker; motor operating mechanism; permanent magnet brushless DC motor; finite element simulation
 
參考文獻
[1] 林莘. 現代高壓電器技術[M] .2 版. 北京：機械工業出版社，2011．
[2] 徐建源，吳溪，林莘. 基于DSP 的真空斷路器運動特性控制技術[J] . 沈陽工業大學學報，2008，30(5)：481-484．
[3] 楊濤，黃瑜瓏，李大衛，等. 高壓斷路器電機操動機構技術的研究[J]. 清華大學學報( 自然科學版)，2010，50(4)：521-524.
[4] BOSMA A, CAMERONI R, BLUNDELL M.Introducing a new generation of operating mechanism for high voltage AC circuit-breakers[J].Journal of Electrical & Electronics Engineering, 2002, 21(3)：233-240.
[5] BOSMA A , THURESON P O . A new reliable operating mechanism for HVAC circuit -breakers[C]//IEEE/PES Transmission and Distribution Conference and Exposition, 2001：573-577.
[6] 唐任遠. 現代永磁電機理論與設計[M] . 北京：機械工業出版社，2016.
[7] SHI Fei, LIN Xin, XU Jianyuan.Theoretical analysis of mechanical characteristics of vacuum circuit breaker with spring operating mechanism[C]//Proceedings-International Symposium on Discharges and Electrical Insulation in Vacuum, 2004：438-441.
[8] 陳世坤. 電機設計[M].2 版. 北京：機械工業出版社，2017.
[9] 湯蘊璆，梁艷萍. 電機電磁場的分析與計算[M] .北京：機械工業出版社，2010.
[10] 邱國平. 永磁直流電機實用設計及應用技術[M] .北京：機械工業出版社，2009.