Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

550 kV快速接地開關新型自力型觸頭設計與計算

來源:電工電氣發布時間:2022-02-28 09:28 瀏覽次數:640

550 kV快速接地開關新型自力型觸頭設計與計算

郭瑞彬,沈威,王亞鴿
(上海西門子高壓開關有限公司,上海 200245)
 
    摘 要:針對接地開關常用梅花觸頭結構復雜、安裝困難、成本較高等缺點,設計了新型自力型觸頭結構。通過增加壓緊彈簧來提高接觸壓力,利用自身的高導電性和可靠的接觸壓力,提高耐受短路電流產生的電動力能力。采用有限元分析和理論計算對觸指進行優化,計算觸頭接觸壓力,并對動熱穩定性以及短路關合能力進行校核,確保了新型自力型觸頭設計合理性。
    關鍵詞:快速接地開關;新型自力型觸頭;接觸壓力;動熱穩定性
    中圖分類號:TM564 ;TM595     文獻標識碼:B     文章編號:1007-3175(2022)02-0057-04
 
Design and Calculation of New Type Self-Elastic Contact for
550 kV High-Speed Earthing Switch
 
GUO Rui-bin, SHEN Wei, WANG Ya-ge
(Siemens High Voltage Switchgear Co., Ltd, Shanghai 200245, China)
 
    Abstract: This study designs a new self-elastic contact structure to solve the shortcomings of plum blossom contacts, such as complex structure, complex installation, high cost, etc. It increases the contact pressure by adding a compression spring, and uses its own high conductivity and reliable contact pressure to improve the electrodynamic ability to withstand short-circuit current. It increased the contact pressure by adding a compression spring and used its high conductivity and reliable contact pressure to improve the electric power capability generated by the withstand short-circuit current. This paper also used finite element analysis and theoretical calculation to optimize the contact finger, calculated the contact pressure of the contact, and verified the dynamic and thermal stability and short-circuits closing capability to ensure the rationality of the new self-supporting contact design.
    Key words: high-speed earthing switch; new type self-elastic contact; contact pressure; dynamic thermal stability
 
參考文獻
[1] 黎斌.SF6 高壓電器設計[M].5 版. 北京:機械工業出版社,2019.
[2] 黎斌,張正周. 彈簧觸頭的設計[J] . 高壓電器,2007,43(5) :358-360.
[3] 郭媛媛,崔博源,王承玉,等.1 100 kV/63 kA 氣體絕緣金屬封閉開關設備的研制[J] . 電網技術,2011,35(12) :20-25.
[4] 李健. 淺析彈簧觸指在 GIS 中的應用[J]. 高壓電器,2007,43(6) :438-439.
[5] 耿小亮,范春虎,艾紹貴,等. SF6 電流互感器結構強度有限元分析[J]. 高壓電器,2007,43(4) :250-252.
[6] 孫永恒,張鐸,孟維東,等. 新沈高 1 100 kV GIS 的結構及計算[J]. 高壓電器,2007,43(5) :354-357.
[7] 林莘,何柏娜,徐建源. 自力型觸頭的設計與計算[J]. 高電壓技術,2008,34(4) :828-830.
[8] 張正周,黎斌. 彈簧觸頭設計 (Ⅱ) [J] . 高壓電器,2009,45(3) :70-72.
[9] 李雪. 一種新型的 GIS 快速接地閘刀[J]. 華東電力,2003,31(9) :86-87.
[10] 張猛,馬曾銳.ZF8-550/4000-63 GIS 的研制[J].高壓電器,2007,43(6) :440-443.
[11] 盧彥輝,張銀穗,孫英杰,等.1 100 kV 快速接地開關短路關合試驗研究[J] . 電工文摘,2015(3) :33-35.
[12] 曹斌. 斷路器自力型主觸頭設計方法及應用[J] .機電信息,2011(15) :148-149.