Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 往年索引

配電網負荷接入最大合理供電半徑簡化計算

來源:電工電氣發布時間:2023-10-28 11:28 瀏覽次數:218

配電網負荷接入最大合理供電半徑簡化計算

林大增,陳建聰,廖劍波,陳波,王蕙
(國網福州供電公司經濟技術研究所,福建 福州 350009)
 
    摘 要:針對業擴負荷接入點選擇主觀性強及大范圍饋線級時序潮流校驗暫時難以施行的現狀,提出了一種配電網負荷接入最大合理供電半徑的簡化計算方法,旨在求取最大半徑以指導負荷接入點選取。引入了負荷矩、等效節點和等效供電半徑等概念以簡化計算,基于電壓降計算給出了求解最大半徑的思路及過程。在 10 kV 線路實例中應用所提方法進行最大合理供電半徑的計算,所提方法適用于各種計算情形,結果可指導負荷接入點選取。
    關鍵詞: 配電網;負荷接入;供電半徑;負荷矩;等效節點
    中圖分類號:TM714 ;TM715     文獻標識碼:A     文章編號:1007-3175(2023)10-0007-05
 
Simplified Calculation of Maximum Reasonable Supply Radius for
Distribution Network Load Access
 
LIN Da-zeng, CHEN Jian-cong, LIAO Jian-bo, CHEN Bo, WANG Hui
(State Grid Fuzhou Electric Power Supply Company Institute of Economics and Technology, Fuzhou 350009, China)
 
    Abstract: In view of the fact that the selection of load access points for business expansion is highly subjective and the large-scale feeder-level time-series power flow verification is temporarily difficult to implement, a simplified calculation method for the maximum reasonable supply radius of distribution network load access is proposed, aiming at obtaining the maximum radius to guide the selection of load access points. The paper introduces the concept of load moment, equivalent node and equivalent supply radius to simplify the calculation,and gives out the idea and process of solving the maximum radius based on the voltage drop calculation. The proposed method is applied to the calculation of the maximum reasonable supply radius in a 10 kV line example, and it verifies that this method is suitable for various calculation situations and its results can guide the selection of load access points.
    Key words: distribution network; load access; supply radius; load moment; equivalent node
 
參考文獻
[1] 白麗麗,孫波,余敏,等. 供電企業高電壓客戶業擴報裝時間的優化[J] . 寧夏電力,2015(4) :69-72.
[2] 沈丹,劉羽佳. 基于電力營銷業擴報裝流程的規范化管理[J] . 現代工業經濟和信息化,2022(11) :297-299.
[3] 譚學猛. 山區配電網的運行策略優化分析[J] . 集成電路應用,2022,39(10) :104-105.
[4] 高小明. 農村地區低電壓原因分析及治理措施[J].農村電工,2022,30(8) :42.
[5] 程軍照,李芳方,莫海峰,等. 配電網變電站經濟供電半徑研究[J] . 電力系統保護與控制,2022,50(15) :129-137.
[6] 張麗麗.杠桿模型在力矩平衡問題解決中的應用[J].物理通報,2019(5) :17-20.
[7] 何仰贊,溫增銀. 電力系統分析(下冊)[M].3 版. 武漢:華中科技大學出版社,2002.